unisonic technologies co., ltd imx2 dual transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r215-004.ba general purpose dual transistor ? features * two 2sc2412 chips in a smt package ? equivalent circuits tr2 tr1 (1) (2) (3) (4) (5) (6) ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 4 5 6 imx2l-ag6 -r imx2g-ag6-r sot-26 c2 b1 c1 e1 e2 b2 tape reel note: pin assignment: b: base c: collector e: emitter (1) r: tape reel (2) ag6: sot-26 (3) g: halogen free, l: lead free imx2l -ag6 -r (1)packing type (2)package type (3)lead free ? marking
imx2 dual transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r215-004.ba ? absolute maximum ratings (t a =25c) parameter symbol rating unit collector-base voltage v cbo 60 v collector-emitter voltage v ceo 50 v emitter-base voltage v ebo 7 v collector current i c 150 ma collector power dissipation p c 300 (note 1) mw junction temperature t j 150 c storage temperature t stg -55~+150 c note: 1. 200mw per element must not be exceeded. 2. absolute maximum ratings are those val ues beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25c) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c = 50a 60 v collector-emitter breakdown voltage bv ceo i c = 1ma 50 v emitter-base breakdown voltage bv ebo i e = 50a 7 v collector cut-off current i cbo v cb = 60v 0.1 a emitter cut-off current i ebo v eb = 7v 0.1 a collector-emitter satu ration voltage v ce ( sat ) i c / i b = 50ma/5ma 0.4 v dc current transfer ratio h fe v ce = 6v, i c = 1ma 120 560 transition frequency (note) f t v ce =12v, i e =-2ma, f=100mhz 180 mhz output capacitance c ob v cb = 12v, i e =0a, f=1khz 2 3.5 pf note: transition frequency of the device. ? classification of hfe rank q r s range 120-270 180-390 270-560 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
